Rfcontrol Dual Output Remote Control Socket
Rfcontrol Dual Output Remote Control Socket
Changxing Potek Electronics & Technology Co,. Ltd is one of the toppest Rfcontrol Dual Output Remote Control Socket in China.During these years of exporting , Changxing Potek Electronics & Technology Co,. Ltd now has rich experience in the worldwide markets
Rfcontrol Dual Output Remote Control Socket
  • Information
  • Features

Product Attributes

  • Model No.: SK510+TX221/TX221-6
  • Standard: American Standard

Supply Ability & Additional Informations

  • Payment Type: L/C,T/T
  • Incoterm: FOB
  • Transportation: Ocean,Air
  • Port: SHANGHAI

This product controller uses a 6-button RF remote control that can control 3 SK510s simultaneously.


Each set of buttons can learn to control a 510 receiver, each group of buttons individually controlling one 510 and each 510 can only be controlled by a group of buttons.


First connect the socket to the 125V/60HZ power supply, the indicator light flashes slowly, and use the remote control to learn to pair. After learning successfully, you can use the remote control switch function: press the ON button of the remote control, the receiver will open, press the OFF button of the remote control, the receiver will be turned off.


Initially powered on, the indicator light flashes slowly.


Learning function: When the indicator light flashes slowly, press the ON button on the remote control first, then press the OFF button on the remote control, the indicator light does not flash. At this time, press the ON/OFF button of the remote control to switch normally, then the learning is successful. Otherwise, the learning state is automatically exited in 15 seconds.


Remote switch function: Press the ON button of the remote control, the receiver will open, press the OFF button of the remote control, the receiver will be closed.


Learning method: 510 power on 5S, when the indicator light flashes slowly, first press the ON button on the remote control, then press the OFF button on the remote control, the indicator light does not flash, then press the ON/OFF button of the remote control to switch normally. Then the study is successful. Otherwise, the learning state will be automatically exited after 15 seconds.


Change the group button control method: just in the power-on learning state, you can use another group of buttons to learn, the original learning record will be invalid.

Input voltage

125Vac,60Hz

Output current


15A Max,1875W,8A tungsten


Frequency


315Mhz


Remote control distance

1-14 2.4GHz

Standby power consumption


>100 feet


Use


for indoor use only

Product Catalog